How to move a window to a different space the easy way in mac os x

Updated: 2 months ago

Sometimes you may want to rotate your Mac screen in your workflow. Don’t worry, this post will show you how to rotate screen on Mac quickly and easily.

Kindly note that there’s no keyboard shortcuts in Mac to flip screen for now, so you’ll need to go to your system setting to do that.

Way 1

1) On your Mac desktop, click System Preference from the Apple menu.

2) Click Displays.

3) From the Display tab, you can select the orientation from the Rotation drop-down menu.

You can four options:

• Standard: It’s the default display settings of Mac displays. You have the standard display when your Mac came.
• 90°: It rotates your Mac screen side into a vertical layout.
• 180°: Your Mac screen (standard display) rotates upside down when choosing this rotation.
• 270°: It flips your display screen and rotates it into a vertical layout.

If you don’t see the Rotation settings on your screen, it’s likely that your device doesn’t support rotating the screen.

4) Select the rotation that you want your Mac screen to be, and confirm your choice by clicking Confirm on the Confirm new display settings dialog.

If you don’t want this display rotation, you can click Revert, or do nothing and wait for 15 seconds to go back to your original display screen.

Then you should have successfully rotate your screen on Mac.

Way 2

If the method above doesn’t work for you, don’t worry. You can try this tip that has worked for many Mac users:

1) Close System Preference and go back to your Mac homepage.

2) Press and hold down the Option key and Command key on your keyboard, and click System Preference then click Displays without letting go.

3) Then you should have the Rotation option and select the orientation that you want.

• Standard: It’s the default display settings of Mac displays. You have the standard display when your Mac came.
• 90°: It rotates your Mac screen side into a vertical layout.
• 180°: Your Mac screen (standard display) rotates upside down when choosing this rotation.
• 270°: It flips your display screen and rotates it into a vertical layout.

4) Select the rotation that you want your Mac screen to be, and confirm your choice by clicking Confirm on the Confirm new display settings dialog.

If you don’t want this display rotation, you can click Revert, or do nothing and wait for 15 seconds to go back to your original display screen.

Then you should be able to rotate your Mac screen. Hope this post comes in handy and help you through.

By Lillian Lai

Lillian, a Microsoft Certified Professional (MCP), is a technology enthusiast, longing to share the technical tips and solutions to computer problems. Also as a person who enjoys writing, she’s found the perfect match for writing and technology. When she’s not writing, you’ll find her either reading or playing mobile games.

“Mission Control” virtualių stalinių kompiuterių funkcija, įtaisyta “OS X”, yra tikrai malonus, tačiau viena erzina tai, kad judantys langai į kitą erdvę yra šiek tiek varginantis. Galite dešiniuoju pelės klavišu spustelėti doką esančią piktogramą, bet vargu ar tai yra sprendimas. Štai kaip tai padaryti lengva.

SUSIJĘS: “Mission Control 101”: kaip naudoti kelis stalinius kompiuterius “Mac” kompiuteryje

Tiesiog todėl, kad visi esame tame pačiame puslapyje, paprastai jūs naudojate tris arba Keturi pirštai perbraukite pelės klavišu ir įjunkite “Mission Control”, tada vilkite langą į naują darbalaukį.

Bet tai reiškia, kad pelės spragtelėję, tai labai rūpi, kai tai darote daug.

Laimei, yra Lengvas būdas.

Antrasis metodas, paprastas būdas

Viskas, ką jums reikia padaryti, tai spustelėkite bet kurio lango antraštės juostą, tada naudokite CTRL + 1 arba 2 arba bet kurį kosmoso numerį.

Nėra jokio būdo žinoti, kad iki tik klaviatūros naudojimas perkelia langą, bet tai tikrai padeda. Jei žinote apie geresnį metodą, būtinai praneškite mums į komentarus.

Jei turite “Xbox 360” konsolę, galite lengvai bendrinti visas savo kompiuteryje esančias nuotraukas, vaizdo įrašus ir muziką naudodami konsolę. Tai yra labai malonu, jei turite “Xbox” prijungtą prie savo didžiulio plokščiaekranio televizoriaus ir norite parodyti savo šeimos nariams ir draugams namų vaizdo įrašus ar nuotraukas.Priklausomai

Minecraft yra ir, artimiausioje ateityje, išliks vienu iš populiariausių vaikų žaidimų vaizdo žaidimų. Už visų šių milijonų į milijonus atsisiuntimų yra daugiau nei keletas įdomių tėvų; skaitykite toliau, nes mes padedame išsiaiškinti kai kuriuos neteisingus supratimus ir parodyti įdomius tėvus žaidimo avarijos metu.

In Windows 7, its super easy to see what windows you have open for each application without leaving the window you’re currently in. In OS X however, this is not the case. While there is always Exposé, this requires an extra key-press or gesture, and takes you away from your currently active window. In trying to solve this problem, I found a great app called DockView.

DockView is a quick drag-and-drop install from the developers at Kapeli. It offers quick views of all an applications open windows, just by mousing over the application’s icon in the dock. The install is standard. Just click the download link and load up the zip file, then drag the app into your Mac’s Applications folder. The preferences dialog box offers options ranging from general application preferences to appearance preferences, and even offers filters, allowing you to force the application behave in a certain way depending on what specific program it is, or whether a program’s windows are minimized or not. It also offers options for hot-key assignments, for those of you who are more apt to use the keyboard.

To access the preferences panel, and more, just click the newly added icon in your menu bar, here:

The preferences panel will look like this:

The default settings are recommended by the developers, at least to start out with, and I’ve found no reason to change them. They provide you with simple pop up boxes that will pop up as soon as you mouse over a dock icon. Once you do that, you can move on to the next app in your dock, or simply click a window to maximize it, or bring it to the front if it was already up. This is super handy for applications like photoshop or web browsers, where you tend to get a bunch of different windows open pretty easily. The pop up are elegant and non-intrusive. By default they appear like the example below, but can be tweaked pretty extensively as far as size and appearance.

DockView is free to try with rare pop-ups asking you to register, but a license is a great deal at $7.99. While you’re over at Kapeli’s site, they’ve got a few other inexpensive apps for Snow Leopard that are worth checking out as well.

Is this a feature that you like in Windows 7, and are glad to have on your Mac? Should it be included anyway? Know of any other cool programs to bring extra features to OS X? Tell us in the comments!

Download DockView here! (DockView requires OS X Snow Leopard, the most recent version of Mac OS)

Our latest tutorials delivered straight to your inbox

Try this workaround.

Home » Guides » How to Play Fall Guys on Mac

Fall Guys: Ultimate Knockout hit the Epic Games Store on June 21, and since then, the game has amassed over 20 million new players after going free-to-play. As always, these freebies are available only for PC and console players, and Mac users are sadly left behind due to compatibility issues. But that doesn’t mean they can’t play Fall Guys on a Mac. By the end of this guide, you’ll definitely learn how to play Fall Guys on Mac and embark on the battle royale journey with your friends.

Downloading and Playing Fall Guys on Mac

Before moving forward, meeting some requirements is essential to bring Fall Guys to your Mac. First of all, ensure that your system is up-to-date, including the latest Boot Camp Assistant version. In addition, create a bootable Pendrive of Windows 10 and ensure that at least 64GB of free storage space is available on the Mac.

Once you fulfill these requirements, here are the steps to run Fall Guys on Mac:

Change your Secure Boot setting

The first step is to change the Secure Boot setting of the Mac to Full Security. In order to do this, press and hold Command (⌘)-R immediately after you see the Apple logo while booting up. Then, choose Utilities > Startup Security Utility from the menu bar and change the secure boot to Full Security.

Launch Boot Camp Assistant

You can launch the Boot Camp Assistant from the Utilities folder in Applications. Then, insert the bootable pen drive when prompted by the system.

Set the size of the partition

When Boot Camp Assistant asks you to set the size of the Windows partition, make sure that you allocate at least 64GB for a seamless installation.

Format the partition and install Windows

After allocating some free space, hit the Install button within the Boot Camp Assistant and format the whole partition. After installation completes, your Mac will reboot into Windows OS and follow the on-screen instructions to proceed.

Download the Epic Games launcher and login to your account

Epic Games is one of the most popular video game digital distribution services that distribute Fall Guys’ digital copy as well. Simply, download and install its setup from the official website. Then, login to your account or sign up for a new one.

Install and play Fall Guys from the Epic Games store

Finally, download Fall Guys from the Epic Games store by navigating to launcher >> store >> Fall Guys >> Play Now. After installation, you may need to connect to your Steam account in order to play Fall Guys on the Mac.

Play Fall Guys on Mac With Parallels

Apart from this, Parallels is a great application to run Windows on your Mac system. As the name suggests, the software can run both macOS and Microsoft Windows simultaneously, meaning users can switch between them anytime without rebooting the machine.

Simply, download Parallels from the link below and install the Epic Games launcher to play Fall Guys on Mac.

Play Fall Guys on Mac With Cloud Gaming

Another way to play Fall Guys on Mac is by using popular Cloud Gaming Services like NVIDIA GeForce Now, Google Stadia, and more. If you weren’t aware of this concept, cloud gaming is online gaming that runs games on remote servers and broadcasts them to your device’s screen. Using this service, players can play almost all the video games on multiple platforms such as Mac, Android, iOS, Android TV, and more.

So, there you have it. That’s everything you need to know about playing Fall Guys on a Mac. For more tips and guides, check out How to Get Prime Gaming Rewards in Fall Guys, How to Fix Fall Guys Stuck on Looking for Players (Fall Guys Queue Time), and more.

Many people want to share files between computers or between computer and phone in an easy way. Well, provided your devices are connected to the same network, you can create a shared folder on the computer so that other devices can access it without any hassle. Now follow the guide below to learn how to share a folder or a hard drive in Windows/Mac over the network.

Detailed Steps on How to Share Folder/Drive

Windows Users

The processes to share a folder or hard disk in Windows 10, Windows 8 and Windows 7 are exactly the same, aside from one extra feature Windows 10 owns while the others don’t, which is the ability to create or join a homegroup.

Share a folder

1. Locate the folder that you would like to share, right-click it.
2. In the drop-down window, choose “Share with” > “Specific people…”.
3. Choose people or group to share with. Usually, you can just select your computer account. Apart from it, you can also select “Everyone”, in which case, all the devices connected to the same WiFi can have access to the folder without the need to enter the password. Although it’s convenient, it is not very secure.
4. At last, click “Share”. Then the folder is now being shared.

Share a drive

1. Open “This PC”, right-click the hard drive you want to share.
2. Choose “Share with” > “Advanced sharing…”.
3. After a window pops up, go to “Sharing” tab, click “Advanced sharing…”.
4. In the newly-opened window, check “Share this folder”, and then you can change the number of simultaneous users (more than 10 is suggested). Lastly, click “OK”.

Note: If you want to make sure your shared folder or shared hard drive are safe, you can go to “Control Panel” > “Network and Internet” > “Network and Sharing Center” > “Change advanced sharing settings”.

If you are using Windows 10 or Windows 8, click “All Networks”, choose “Turn on password protected sharing”, and click “Save changes”.

If you are using Windows 7, you may find the option to “Turn on password protected sharing” under “Home or Work”.

Of course, you can turn off the password protection using the same way.

Mac Users

Since most people have updated their Mac to the latest operating systems, such as OS X EL Capitan or macOS Sierra, I will just show you how to share your files on the Mac OS 10.

1. Tap the Apple icon on the left upper corner, click “System Preferences…”.
2. In the window, locate “Sharing” and open it.
3. After that, check “File Sharing” and click the “+” under the “Shared Folders” box.
4. Select the folder and click “Add”. Then the folder will be added in the “Shared Folders” box.
5. If you want to add more users to access the shared files, you can click the “+” under “Users” box” and choose from either “Users & Groups” or “Contacts”.
6. Tap “Options…”, check “Share files and folders using SMB” and check the box in front of the account name. Tap “Done”.
7. At last, you can change the amount of access behind each user’s name. Read & Write means the user can view and copy files from and to this folder. Write Only means the user can only put files into the folder without the permission to see the contents. Read Only represents the opposite, meaning that the user can only view the contents but cannot import files into it. No Access means the user can neither view nor copy the content of the folder.

Note: OS X permits guests to have access to the shared files on your Mac. If you want to turn it off, please go to “System Preferences…” > “Users & Groups” > “Guest User”, and uncheck “Allow guest users to connect to shared folders”.

A Useful App to Access Shared Folder from Phone

After you create the shared folder or hard drive, you can get access to them not only on another computer but also on your phone. With the help of an app called AirMore+, you can freely view or transfer files between mobile phone and PC over local area network.

Adobe OS Widget Library (OWL)

Adobe OWL is a shared library that provides a consistent look and behavior to the user interface (UI) of those Adobe applications that incorporate it. Adobe CS4 applications which incorporate this library include: Contribute, Dreamweaver, Illustrator, InDesign, Fireworks, Flash and Photoshop.

Application frame (Mac OS X Only)

The Application Frame is a new feature for Mac CS4 applications that use OWL. The concept is similar to the way that application windows function on Windows operating systems. It enables document windows to move with the application, and supports new features like resize-able N-up window configurations. Because this is very different than the way Mac application windows traditionally operate, it is turned off by default. When turned on, it can produce some confusion, especially when working in a mixture of tabbed document windows, which are children of the application window, and floating windows, which sit above (and sometimes below) the application window. If at any time, your document windows seem to disappear, or are in some other way not accessible, use one of the Arrange commands from the Window menu, such as Consolidate All Windows, Tile, or Cascade.

Document window arrangement

In addition to the traditional Cascade and Tile options, there are now Arrangement commands to Consolidate All Windows, Float in Window and Float All in Windows. These new options are used to move document windows in and out of a tabbed state. If you run into any unexpected behavior, try turning on or off the application frame (if using Mac OS).

Panel arrangement and Workspaces

Workspaces are stored on disk as XML files. Default workspaces that ship with the products, are typically located in a folder named “Workspaces” somewhere in the application folder. The exact location varies by product. If a workspace you are expecting to see is not displaying, check to see if it’s XML file can be found in this folder. If it is missing, you will need to reinstall the application. User defined workspaces are typically stored in a folder named “Workspaces” somewhere in the application’s preferences folder. This location varies. Check for information on resetting preferences for your application to find the exact location. If you are experiencing problems when switching or resetting workspaces. Try removing some of the user defined workspaces to see if that solves the problem. If not, try removing some or all of the defaults workspaces from the application folder.

If panels become inaccessible or unusable for any reason, then try executing the Reset [name of workspace] command from the Window > Workspace menu, or the Workspace switcher widget on the application bar.

Known issues

Issue [1854571] (Mac OS X Only): When you dock a floating window to the tab well while the application frame is active, remaining floating document windows will move behind the application window, causing the impression that the documents are no longer open.

Solution: Use one of the Arrange commands from the Window menu, such as Consolidate All Windows, Tile, or Cascade. This will bring all of the document windows to the front of the application window.

1. Download and install MacKeeper .
2. Once installed, open it and start the auto scan to find the issues.
3. Click Clean to get rid of all possible troubles.

• MacKeeper has been downloaded by 0 readers this month.

Multiple desktops can be useful, especially if you’re multitasking or if you want to keep your workspace neatly organized.

Mac computers have had native support for multiple desktops for a while now, and in today’s article, we’re going to show you how to use it properly.

How do I use multiple desktops on Mac?

1. How do I create multiple desktops?

1. Use one of the following methods to start Mission Control:
   • Swipe up on trackpad with three or four fingers
   • Press the F3 button
   • Press Control + Up
   • Open Mission Control app
2. Move your mouse to the top of the screen and you’ll see Desktop 1 and Desktop 2 icons.
3. To move a window to a virtual desktop, just drag and drop it to the desired desktop.

2. How can I manage multiple desktops?

How to switch between desktops?

1. Make sure that Mission Control is running.
2. Move your cursor to the top of the screen and select the desired desktop.
3. Note: You can also use Control + Right and Control + Left shortcuts to switch to a different desktop. You can use Command + Number to switch to a specific desktop quickly.

How to create/remove desktops?

1. To create a new desktop, just move the mouse to the top of the screen and click the Plus icon.
2. To remove a desktop, move the mouse to the top, press and hold the Option key and click the X icon next to a desktop.

How to assign applications to desktops?

1. Switch to the desired desktop.
2. Open the app that you want to assign.
3. Right-click its icon in the Dock.
4. Choose Options:
   • All Desktops – if you want the app to appear on all desktops
   • This Desktop – if you want the app to be available only on this desktop

How to customize virtual desktops settings?

1. Go to Apple menu > System Preferences.
2. Now select Mission Control.

From there you should be able to customize virtual desktop and all its features as you like.

Having multiple desktops on your Mac is a great way to boost your productivity, and we hope that you now better understand how this feature works.

If you take a lot of screenshots on a Mac, you might end up with a cluttered desktop. This is because Macs automatically save your screenshots on the desktop. They are also saved as PNG files instead of the more widely used JPEG format. If you want to know how to change where screenshots are saved on a Mac, and the format they are saved in, just follow the steps below:

Where Do Screenshots Go on a Mac?

When you use keyboard shortcuts like Command + Shift + 3, your screenshots are automatically saved to the desktop. You can also right-click the floating thumbnail, which lets you save the screenshot to Documents or Clipboard.

How to Change Where Screenshots are Saved on a Mac

There are two ways to change the default screenshot save directory on a Mac, depending on your operating system. The easier way is through the Screenshot app in macOS Mojave. For mac OS High Sierra or earlier, you have to use Terminal, an app for entering command prompts to control your Mac. Below are the steps for each operating system.

How to Change Where Screenshots are Saved in macOS Mojave or Later

1. Go to the Utilities folder and open the Screenshot app. You can also open the Screenshot app by pressing Command + Shift + 5.
2. Click Options.The top tile of the menu will show your Save to options:
   • Desktop – This is the default setting which saves the screenshot with the following time format: Screen Shot [date] at [time].
   • Documents – This will save the screenshot to your Documents folder with the time and date as the file name.
   • Clipboard – This will allow you to paste the screenshot to another app which can edit or view images.
   • Mail – This lets you compose a new email in the Mail app with the screenshot attached.
   • Messages – This will attach the screenshot to a message which you can send to a contact.
   • Preview – This will launch Preview, a photo editing app. Your Mac will temporarily name the image file as Untitled until you change it to a different file name.
   • Other Location – This will allow you to navigate outside of the locations previously listed to a folder of your choice. You can save to an existing folder or create a new one.
3. Choose a Save To option. Your Mac will remember the last one you have selected and will apply this to subsequent screenshots.

How to Change the Default Screenshot Save Location in macOS High Sierra or Earlier

1. Open Terminal. You can find the Terminal app in the Utilities folder.
2. Type the following command, followed by a space:

Note: Make sure to put a space after the word location, otherwise the command won’t work.

How to Change a Screenshot to JPG and Other File Formats

By default, Macs save screenshots as PNG files, which are usually larger than JPG files. Both can be used for social media, but JPGs are more universally accepted. To save a screenshot as a JPG, use the Terminal to override the default format setting.

1. Open Terminal.
2. Type the following command, followed by a space:

You can also choose to save your screenshots as other formats by default. You can save them as PDF files if you want to edit or open the image in Adobe. You can save them as TIFF files if you want to retain their original image data even after manipulating the image. Or you can save them as GIF files if you want the image to load quickly on the web. Just choose any of the following commands, followed by a space:

Note: Make sure to put a space after the file type, otherwise the command won’t work.

Once you know how to change the default screenshot settings on your Mac, you’ll be able to customize and improve the way you work with screenshots. Taking a screenshot on a Mac also takes some getting used to, especially for Windows users who are used to hitting the Print Screen key. If you need to improve your screenshot skills, check out our article about how to take a screenshot on a Mac.

Post by alf50 » Tue Aug 16, 2011 5:24 am

Can someone show me a OOo Calc macro to Maximize a window.
I want this macro to look at the
– current size of the computer screen I am on,
– Leave all the Menus in the Calc Window available for my use,
– Leave all the Docing bars visible on the screen, and
– Maximize the the window to the remaining space.

On a Macintosh running OS X 10.6.8 This is equivalent to clicking the Green “+” Button in the upper Left Corner of the window.

On a PC running WIndows 7, this is equivalent to clicking the square box in the upper right hand corner of the window.

I have been looking for a solution for weeks without success.

I DO NOT WANT THE “FULLSCREEN” view that eliminates all the menu bars. Any help would be greatly appreciated!!

Re: OOo Calc macro to Maximize a window

Post by FJCC » Tue Aug 16, 2011 6:17 am

Re: OOo Calc macro to Maximize a window

Post by alf50 » Tue Aug 16, 2011 10:57 pm

FJCC-
When I try to run the code as a separate macro, it does nothing.

I also tried dimensioning each element (ie: oController, oFram, oContainerWindow) as Objects, but that did not work either.

I tried running on both a OS X 10.6.8 Mac and a Win 7 PC.

Any other suggestions.

Re: OOo Calc macro to Maximize a window

Post by RPG » Tue Aug 16, 2011 11:46 pm

The code is working for me.
Store the macro in the document and not in My macros.

Re: OOo Calc macro to Maximize a window

Post by alf50 » Wed Aug 17, 2011 1:35 am

None of my efforts seem to do anything. I set up a button on the Calc Spread Sheet I have open,
then I link the button to Mfull, but when I click the “Full” Button, nothing happens. Any suggestions about any other code modifications?

If I knew what arg1() values to pass to the dispatcher, and what “.uno:isMaximized” CALL name to use, maybe this would work.
Is there a list of dispatcher, .uno: commands that I can go to??

Re: OOo Calc macro to Maximize a window

Post by FJCC » Wed Aug 17, 2011 4:08 am

Here is a file with my original macro. If I open it at less then full size and then click the button on Sheet1, the Calc window fills the screen. Does it work for you?

The dispatcher commands are poorly documented. A list is here but note that it is for OOo 2.X, showing how old it is.

Re: OOo Calc macro to Maximize a window

Post by alf50 » Wed Aug 17, 2011 5:16 am

Your “FullSize.ods” does not work on the Mac using OS X 10.6.8 or my PC Laptop running MS Win7.

I am running OOo 3.2.1 on both the Mac and the PC. The 3.3 is unstable in WIndows 7.

Does this macro only work in 3.3?

I also tried running it under 3.3 on the Mac, the macro doesn’t work there either.

Re: OOo Calc macro to Maximize a window

Post by FJCC » Wed Aug 17, 2011 6:17 am

Re: OOo Calc macro to Maximize a window

Post by MrProgrammer » Thu Aug 18, 2011 4:31 pm

You’re spending too much time on this. Just get used to the way Mac’s work. Personally, I also prefer the windows in all applications to be maximized but find that sometimes (not too often) I open a non-OOo application (say a PDF in Preview) and have to drag the window edges to make it larger. You can read about what others have done by searching the web (not this forum) for terms like: Mac Maximize Window Shortcut Button Size Full Screen Commmand etc. But note that there are some applications (like the Mac’s Calculator) where it is impossible to maximize the window.

For OOo, specifically, I find that once you have manually maximized the window size, OOo remembers that and opens documents in maximized windows. So you don’t need a button or macro after you’ve set it the first time.

If this answered your question please go to your first post use the Edit button and add [Solved] to the start of the title. You can select the green checkmark icon at the same time.

Adding free space from drive to drive is the best way to make full use of hard drive space. Excess space in large partition will not be wasted and the problem of lack of memory in smaller drive is also solved.

• Move Desktop, Download and Documents to another drive on Windows 10
• How to free up hard drive space with CompactGUI

You install operating systems, system programs, applications and personal data on a hard drive partition. If there is not enough space or memory available for the system drive, you cannot install new applications on this partition. Apps that are currently on the C drive may also not work well. Worse, running system performance may be affected.

Likewise, if there is not enough space on the data drive, such as partitions D, E, F, you cannot store new data in this partition. Also, you cannot create new documents or files from this partition.

In case, the computer’s hard drive partition was not properly partitioned when you bought it. For example, initially, the system drive is partitioned with 60GB. After a year of using the PC, it turns red and gives a warning about low drive capacity.

Adding free space from drive to drive is the best way to make full use of hard drive space. Excess space in large partition will not be wasted and the problem of lack of memory in smaller drive is also solved. So why don’t you do this?

How to transfer space from one drive to another in Windows 10/8/7

Technically, there are several solutions to this problem, since the theory is that you will increase the space of one drive by reducing the capacity of the other. To change the unreasonable partition layout, you can resize partitions using Diskpart, Windows’ built-in tool. However, this is like a detour, because whether you increase or decrease the size of the partition, the unallocated space will not be the location you want.

Disk Management is also a great tool for managing the hard drive and its partitions. Disk Management has a graphical user interface suitable for users with limited computer knowledge.

If there is unallocated space adjacent to the partition you want to increase, simply right-click on that partition and select Extend Volume. If not, you can delete the adjacent partition to make it unallocated, then repeat the steps above. Remember to back up files before formatting or deleting.

There is also MiniTool Partition Wizard tool.

Although Windows offers great tools, some users still wonder if there is a way to allow free space allocation from one partition to another without having to format the hard drive or any partitions. do not.

Fortunately, the answer is yes. AOMEI Partition Assistant Professional provides a feature called Allocate Free Space, which can help transfer free space from one drive to another, such as moving space from drive D to drive C in Windows PC. To do this task in Windows Server, you can switch to the Server instance.

How to transfer space from drive D to drive C Windows 10 through a professional manager

1. Install and launch AOMEI Partition Assistant on the computer. Right click on the partition you want to allocate (partition D has free space) and select Allocate Free Space .

2. In the pop-up window, you are given the option to specify the space size and target partition. Select drive C from the given list.

3. This is a virtual result. Click Apply> Proceed to make it a reality.

Note :

Since it is related to the system drive, a reboot is required.

This process applies to different partitions on the same physical hard drive. Drives on different hard drives cannot work this way.

– This version also supports command line operations, so you can resize or move partitions etc. from the Command Prompt.

It’s easy and fast! In three steps, free space is magically moved from a large drive to a smaller one. AOMEI Partition Assistant Professional is an enhanced version and it has a Standard version with less functionality. With this basic tool, you can also transfer storage from one drive to another to redistribute space for free.

Step 1: Right-click on the partition with redundant space and select Resize Partition to create unallocated space on the hard drive. The position of the unallocated space does not matter.

Step 2: Click Apply.

Step 3: Right-click on the partition you want to increase capacity and choose Merge Partitions. In the pop-up window, you are allowed to check both the partition and the unallocated space.

Step 4: Click Apply to perform pending operations.

How I made the Transition form Windows to Mac for Photo Editing

My Computer History and why the change!

I go back a few years with computers starting with the DOS operation system and was a Beta tester for Windows NT, now just Windows. My first photo editing software was Windows version of Capture One so my backup data was on USB drives with Sessions and some Catalogs. I decided to have a fresh look into the Mac in 2015 just to see if I could simplify life from the Windows marketing and other forced improvements they claim like security updates that are forced without notification!

For years I just didn’t care for the way Mac forced their chip and operating system that forced you to totally go Mac and not look back. Mac OS is basically a Unix operating system with a Mac interface and knowing that Unix is a very stable OS was very encouraging. The chip set is the same on Mac and PC based so that was encouraging but really doesn’t matter so much other than the cost is lower.

The firs big setback was the file system on the backup USB drives is different than Windows NTFS so the challenge was to make sure I could still get to my legacy data with the Mac. (More to follow on that.)

Next was comparing the cost so I had a look at updating my hp Z Book with compartmental memory and screen resolution and found the price to be about the same. The big selling points were the size, weight and viewing quality. Both computers seem to operate about the same and the chip set were the same. The big difference was the weight was less on the Mac Bool Pro 15 so much less along with the size of the charging brick so I have less to pack. The difference in the display quality was the major factor since you just can’t debate the Retina quality. So I bought the Mac and haven’t looked back. BTW the guarantee was 2 years and not 90 days and I got a free copy of Pages, Numbers and Keynote and would have to buy the Office products.

The big concern was moving form a spinning hard drive to an SSD. Again Mac makes backups so easy with Time Machine that I just don’t worry. I have use it once in 4 years and recovery was very simple. Either way SSD or spinner you need to backup! I use Time Machine to backup everything except Photos. For my Photos I use Backup Guru. More later!

Making the change:

Making the change took a little research and I will explain why I did what I did best I can but at the end of the day there may be a better way or better products to use in the background. The determining factory in “Why” were cost and reliability.

File System for Photo Backup and Legacy data:

Since my existing photo backup was done on a Windows machine then the file system was NTFS. Mac used a different file storage system so I had a look at a converter. What I chose was NTFS for Mac OSx LT. As I recall it was about 30 dollars and it was a one time fee. Simple to install and noting to use. When you plugin an NTFS USB drive it goes to work, No interaction is needed so it stores everything in NTFS format or reads and converts to Mac from backup. I frequently edit photo Sessions directly from the USB drive and no noticeable lag.

Photo Backup and Legacy data:

As I mentioned earlier I use Time Machine to backup everything other than Photos. I do all my photo work in a root directory called PhotoMaster. With Time Machine you can exclude folders so I exclude PhotoMaster.

For the photos I use Backup Guru for the simple reason it was in expensive and doesn’t encrypt the files in some unknown way. It just copies files and looks at the time date stamp. Anything newer overnights what is there. In the past with Windows different products did who knows what so I wanted a very simple system that I could hack if needed. In the past I wrote a simple backup batch file using Robo Copy on Windows since I didn’t like or trust backup software. Backup Guru is very simple just a source and destination selection and go for it. I chose the lite version and get a notice once a year there is an upgrade but haven’t bothered. As I recall I paid a onetime cost of 30 dollars.

Enjoying the Mac experience:

I can truly say I don’t miss Windows! The Mac OS has been stable and in the past four years I have not had a problem. The display is worth the change if nothing more. What I see is what I get from screen to printer. On Windows I purchased a good . monitor that was calibrated with a Color Monkey along with the printer, a step that I no longer seem to need. On Windows I had a workflow using Capture Pilot to verify and my iPad to verify the photo the image before printing. I just use the Mac!

The Mac OS allows simple Scripting that Capture One has opened for use. Now I worked for a software company for more that 23 years but not as a programmer but know enough to hack. I wrote a script to fill in data fields in the Meta Data like my name, address, web page and so on. the most useful is the Original File name. Now all of these can be filled in with Presets except the Original File name. In Presets this is not a dynamic field that I have found but with Scripting it is. In other words the field in Presets needs to be changed manually for each photo. With the script is automatically changes per Image. Nice! Before I process a photo I fill in the Headline filed and Description in the metadata and use the Headline Token to name the photo. My Web page reads these two files and saves me time duplicating the same data twice. Since the file name is different than the RAW file name then I have a link back to the RAW file and it’s neighbors, by storing the Original file name. I use a web based software to get the metadata called Metapicz You can always call the Jpeg in CO.

As you can see I have a complete that is compatible with both Mac and Windows for my file storage so if I want or need to work with Windows I can without a problem. True Windows dominates the market with a small investment of 30 dollars four years ago I am covered!

People say there are more apps for Windows than Mac but for photo editing if it isn’t for the Mac the I don’t need it! As far as Office products when I bought the Mac it had the Mac version came with everything. Easier to use and can export and import to Office Products.

Mac OS X contains many shortcuts, special keyboard combinations you can exercise to make things happen, but unless you make the effort to learn them there’s no guarantee you’ll recall the one you need at the time you most need it. Fear no more: there’s ways to make finding shortcuts easier. Bring out your inner power user!

Dashboard is Apple’s host application for small mini-apps, or widgets. It is a semi-transparent layer that’s invisible unless activated.

There’s all kinds of interesting Dashboard apps, including a series of handy little items which offer you useful lists of keyboard shortcuts, Dashkards.

Dashkards are cheat sheets you can add to your Mac OS X Dashboard and have them handy at the press of a button.

You’ll find Dashcards for Mail, Pages, Safari, Yojimbo, OS X Text, Formatting, Webmail, trackpad and more. Take a look at the Dashcard siterthese free to downloand widgets which should help you find the right keyboard shortcut.

[This story is from Computerworld’s Apple Holic blog. Follow on Twitter or subscribe via RSS to make sure you don’t miss a beat.]

(Incidentally, I continue to think Dashboard could eventually become an environment in which you could run some iOS apps).

Unfortunately, there isn’t a Dashcard for every application, that’s where the next combination kicks in:

Master of command

There’s so many keyboard commands — how to remember them all? Fortunately, you don’t have to. You only need to remember one shortcut, a shortcut I’m going to share with you below.

Meanwhile you may want to take a look at LaunchBar (€24), a smart and powerful, keyboard-driven utility that lets you access and control applications, documents, contacts, calendars, bookmarks, media libraries, search engines and more.

The keyboard combination to rule them all, the heavyweight of the pack has to be Shift + CMD + /. What’s it do? It invokes your application’s help menu, giving you really easy access to Menu Items. But there’s more.

Hover over a menu item and you’ll be shown where it can be found along with a keyboard shortcut for the action. This may help you learn the command. As Adam Walters remarks, this is the keyboard combination to rule them all.

The other ruler

There is one more keyboard command that comes in incredibly useful, particularly when Flash has crashed your browser again: Force Quit (Command – Option – Escape). (The button with a curly pattern on it, the one beside it marked Alt/Option and the one marked esc at the top left of the keyboard).

This raises a menu which enables you to easily shut down applications which have become inactive. You can also achieve this via the Dock by clicking on the application icon while also pressing the Alt/Option key. You can also invoke this via the Apple menu at the top left of your Mac, and clicking ‘Force Quit. ‘

Shortcuts — the list

There’s dozens of lists of shortcuts out there. Here’s three:

Apple’s list of the most common shortcuts (or just use Shift + CMD + /)Dan Rodney’s List of Mac OS X Keyboard Shortcuts & Keystrokes

As it says on the can — an extensive list which should be essential reading for any Mac user.

Relatively extensive collection of shortcuts grouped by application.

Thanks for reading, I hope someone finds this helpful. I’d like to invite you round again, so please feel free to keep up with this blog, follow me on Twitter or RSS.

Jonny is a freelance writer who has been writing (mainly about Apple and technology) since 1999.

End user forums for VirtualBox

• Board index‹General‹VirtualBox on Mac OS X Hosts
• Change font size
• Print view

• FAQ
• Login

Share VM between two Mac OS X users

Share VM between two Mac OS X users

by moojoo » 30. Jul 2008, 22:04

i’m totally new to VirtualBox but i’m very impressed by both the software and the community around it. I want to give VirtualBox a try against my current solution based on Parallels.

But my greatest challenge is to share the same VM with my wife on the same computer. I found a way to use the same disk image with two different VMs but this does not solve my problem.

We make intensive use of the suspend feature. For example I suspend the VM and my wife wakes it up and sees the guest system in the state I have left it. So we need the same VM in use but I can’t get this to work for me.

When I create a VM on my account and change to my wife’s I don’t see any VMs in the list.

Can anyone help me?

Best regards
moojoo

by Technologov » 30. Jul 2008, 22:28

I’m in no way Mac expert, but I still try to help.

I believe it is possible by using some shared folder on Mac OS X.
Is there such thing on OS X ?
How do you share pictures and data between users?
(same way should work with VirtualBox – basically you need to share the virtual hard disk *.vdi)

by moojoo » 31. Jul 2008, 08:15

thanks for your reply. Yes there’s a shared folder concept on Mac OS X and it’s freely configurable with Access Control Lists. I’m also able to share the *.vdi-file with this concept.

But when I create a VM using the shared vdi-file, I don’t see the VM on the other account. I can create a second VM that uses the shared vdi-file but that’s not what I need, because of the pause/resume-issue.

by h1d » 31. Jul 2008, 10:16

by moojoo » 31. Jul 2008, 20:56

thank you for your help but nothing helped out yet. But I found a solution on my own and I think this solution works:

Every User has a VirtualBox.xml within his Library-folder on Mac OS X. So I copied my VirtualBox.xml to the Shared folder and created a symbolic link (in Terminal with the “ln”-command) to the file on my Library-folder and on the folder of my wife.

Since then the VBox GUI shows up the configured VMs in both accounts and I am able to start and suspend the machine from within every account. I’m quite happy with this solution.

@h1d: I never gonna start the same VM or two VMs with same VDI at one time – we have one rule: everytime we finished our work in the VM we have to suspend it and quit the application.

Thanks Moojoo!!

by knowtown » 12. Aug 2008, 22:52

Re: Share VM between two Mac OS X users

by wayneham » 28. Mar 2009, 17:34

Re: Share VM between two Mac OS X users

by moojoo » 28. Mar 2009, 22:35

Re: Share VM between two Mac OS X users

by marcelo1402 » 25. Oct 2009, 14:56

Re: Share VM between two Mac OS X users

by vmmaestro » 26. Oct 2009, 19:11

Re: Share VM between two Mac OS X users

by moojoo » 27. Oct 2009, 10:38

It’s exactly the problem as described in the error message: the file already exists. So you have to delete the virtualbox.xml file first (You can use Finder if you don’t know how to do this in Terminal). After that, the creation of a symbolic link will be successful.

Re: Share VM between two Mac OS X users

by jmscholen » 19. Feb 2010, 16:38

I am trying to do the same thing, but I get an error when I try and start up VB in the other users account. do I need to install windows on the other users account first before I create the link to the shared folder?

The error I get: Failed to create the VirtualBox COM object.

Re: Share VM between two Mac OS X users

by OCR14a » 1. Nov 2011, 18:34

I’m trying to do the same thing, but I need a solution in which I can just set it once, for everyone.
I can’t keep going back in and editing or copying/pasting files around every time a new user logs into the Mac.

Is there a way of just setting up a VM that can be used by ANYONE/EVERYONE?

Re: Share VM between two Mac OS X users

by OCR14a » 1. Nov 2011, 19:37

I figured out a limited-solution.

1. create a folder where you will store the VM and all related files to be shared with all users later. This folder can be anywhere, but higher in the hierarchy makes it less complicated to set permissions on. I put mine at the root of the HD, and named it ‘VirtualMachines’

2. Move the vdisk file into the newly created folder. In my case, that is the .vdi file associated with the VM. Previously, it resided in the following location…
/users/username/virtualbox vas

3. Move all necessary related files into the ‘shared folder’…
a. /users/username/virtualbox vms/vmName.vbox
b. /users/username/library/virtualbox/virtualbox.xml

4. Create a group in ‘Accounts’ that will be used to give users access to the VM/s (I named my group ‘VMGroup’), and place all relevant users into that new group.

5. Change permissions on the ‘shared folder’ so that ‘VMGroup’ has read/write access to the folder.

6. Set the permissions to propagate to all child objects with the ‘Apply to enclosed items’ option.

7. Edit the two files (vmName.xml and vmName.vbox) to make sure the paths all line up correctly with their new homes. You’ll just have to open the two files in text editor and look for obvious paths, and change them to match where they are actually located now after you moved them to the ‘shared folder’.

8. Add VM for each user
Now, when a new user wants to use the VM, they just have to ‘Add’ it via the ‘Machine’ menu within VirtualBox (i.e. NOT ‘New’ or ‘Import’, or anything else, but ‘ADD’).

Now they can all use the same VM.

Of course, it would be nice if there were a way to do it so that I don’t even have to help each use ‘ADD’ the VM, but at least this is better than having to go in and reconfigure all of the settings for each and every new user.

If you have a way of configuring it so that the VM will automatically show up for each and every new user when they first open VirtualBox, please let me know.

Sponsored Links

If you switch frequently between a Mac and a PC, chances are you have to deal with a Windows keyboard from time to time. Thankfully, this can be easy with third-party utilities, or even features already built in to Mac OS X.

For most switchers, the hardest part about learning to use a new Mac is dealing with your muscle memory. For example, if you’re really used to typing Control + C to copy something, Command + C means using your thumb instead of your pinky to perform the operation.

In System Preferences, you can click Keyboard and Mouse to change how your modifier keys (that is, Control, Command, Option and Caps Lock) work. Click the Keyboard tab, and then click the Modifier Keys button at the bottom of the window. You can map the Control key to the Command key (and vice versa, if you prefer) to help ease you in to Mac key commands.

(Not that we condone such activity, but this makes for an easy April Fool’s day prank, too.)

If you need more control (for accessibility reasons, for example), you can use a free utility like DoubleCommand or KeyRemap4MacBook. With DoubleCommand, you can remap keys to the number pad, and make use of multiple-key combos, like shift-backspace for forward delete.

KeyRemap4MacBook lets you specify which keys are remapped to other keys, rather than selecting from a predetermined list. Some remappings aren’t possible (due to the way Mac OS X works), but this is an even more flexible alternative to DoubleCommand.

Also — don’t use DoubleCommand and KeyRemap4MacBook at the same time, as they use the same methods for taking over your keyboard. Dogs and cats living together: mass hysteria.

If you’re looking for keyboard macros — that is, executing a series of keypresses by typing just one key — products like QuicKeys, Keyboard Maestro, and iKey are for you. Windows-centric applications like Parallels, VMWare or Microsoft’s Remote Desktop Connection tool all offer built-in command key mappers to ease the challenge of bi-OS living.

Now if only I could get a keyboard for my feet, I could be twice as productive.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

• Model: Surface Pro 6
• Processor: Intel i5-8250u
• GPU: UHD 620
• RAM: 8GB
• Storage: 128GB SAMSUNG KUS020203M-B000 SSD

• Display
• Trackpad
• Keyboard
• Audio
• Keyboard Backlight

• Wifi (Adapter)
• Bluetooth (Adapter)

• Battery % Indicator
• Cameras
• FaceTime & iMessage

Creating a Bootable USB is completed using MacOS, this can be achieved through a VMWare.

Creating a Bootable USB

1. Download gibMacOS, and used in to download MacOS Catalina. (I used 10.15.3)
2. Type or paste one of the following commands in Terminal. These assume that the installer is still in your Applications folder, and MyVolume is the name of the USB flash drive or other volume you’re using. If it has a different name, replace MyVolume in these commands with the name of your volume.

Catalina: sudo /Applications/Install\ macOS\ –volume /Volumes/MyVolume

1. Download Clover Configurator. Go to Mount EFI > Mount your USB.
2. Copy the EFI folder I uploaded into the USB EFI partition. (Replace any other file)

Setting up partitions for dual boot

1. Go to windows disk manager, shrink your existing Windows Partition.
2. Create a new partition. (You do not need to format this partition)

Installing MacOS

Before you boot from your USB, ensure Secure Boot is disabled from your surface UEFI. Also make sure USB Drive is set to first in the boot order.

1. In the Clover Bootloader, go to settings > graphics injector and change the platform ID to ‘0x12345678’
2. Boot the MacOS from USB
3. Enter Disk Utility, and partition the MacOS section to Mac OS Extended.
4. Continue the installation process

Your laptop may reboot twice. Repeat step 7 and 8 until you can boot into the MacOS partition on your SSD.

1. Boot into MacOS, and go through the setup process.

Rebuilding Cache

You do not have to change platform ID to ‘0x12345678’ anymore

1. Once you reach the desktop screen, open terminal
2. Type in the following commands in order

sudo chmod -Rf 755 /S*/L*/E*

sudo chmod -Rf 755 /L*/E*

sudo chown -Rf 0:0 /S*/L*/E*

sudo chown -Rf 0:0 /L*/E*

sudo kextcache -i /

Trackpad Fix

1. Download KextBeast
2. Place the kexts I provided on your homescreen, and use KextBeast to install them to /Library/Extensions
3. Rebuild Cache, following steps 13.

About

MacOS Installation Guide for the Surface Pro 6